The AR-5c is TJR’s pneumatic collet rotary table that employs a pneumatic brake and 5c collet closer system. This unit is an affordable solution for customers who require a 5c collet for their workpiece as an alternative to a 3 or 4 jaw chuck.
The AR-5c collet rotary table can be integrated into a CNC machine control as a full 4th axis or it can be operated as an indexer by utilizing TJR’s SAC (Single Axis Controller). In addition this series is offered in Right Handed and Left Handed motor mount configurations with a powerful pneumatic braking system.
The AR-5c unit is manufactured with a radial-axial preloaded bearing system for high rigidity that can perform light or heavy cutting. The AR-Series uses a dual lead worm shaft and worm gear to ensure long term indexing accuracy in both directions.
| Item / Model | AR-5c | |
| Table Diameter | ∅ 125 mm | |
| Diameter of Table Center Hole | ∅ 35H7 mm | |
| Inner Diameter of Mandrel Sleeve | N/A | |
| Diameter of Center through Hole | ∅ 35 mm | |
| Center Height (Vertical) | 110 mm | |
| Table Height (Horizontal) | 152 mm | |
| Table T-slot Width | 12H7 mm | |
| Guide Block Width | 14h7 mm | |
| Min. Increment | 0.001° | |
| Indexing Precision | 40 seconds | |
| Repeatability | 4 seconds | |
| Clamping System (Pneumatic) | 6 kg/cm2 | |
| Clamping Torque | 13 kg-m | |
| Servo Motor Model | Fanuc Taper Shaft | a2i / B4is |
| Mitsubishi Taper Shaft | HF-75 / 105 | |
| Speed Reduction Ratio | 1 : 60 | |
| Max. Rotation Rate of Table (Calculate with Fanuc “a” Motor | 83.3 RPM | |
| Allowable Inertia Load Capacity (Horizontal) | 2 kg.cm.sec2 | |
| Allowable Workpiece Load | Vertical | 50 kg |
| with Tailstock | 100 kg | |
| Horizontal | 100 kg | |
| Allowable Load (with Rotary Table Clamping) | F | 1000 kgf |
| FxL | 45 kgf.m | |
| FxL | 13 kgf.m | |
| Strength of Worm Gears | 9 kg.m | |
| Net Weight (Servo Motor Excluded) | 34 kg |
