TJR takes pride in producing high-quality parts for their rotary tables and indexers. Here are three main parts of a rotary table that demand high accuracy and high quality:
1. Dual-lead Worm and Worm Gear
TJR rotary tables feature a dual-lead worm and worm gear made in Japan made from high tensile brass with abrasion resistance of 25.1 mg/cm2 per 10,000m. It has estimated wear life of 10 years, more than twice the wear life of components made from aluminum bronze.
2. High Performance Braking Mechanism
The high performance braking and clamping mechanism is designed with full 360∘circumference hydraulic clamping that is synchronized for the entire table. Having the clamping area on the entire circumference of the table allows for improved rigidity, making it an ideal feature for heavy cutting application. With a higher clamping force than conventional disk braking systems, the mechanism’s proximity to the worktable reduces deviation during cutting.
3. Radial-axial preloading bearing
TJR uses Radial-axial preloading bearings. The axial component of these bearings has an axial cylindrical roller and cage assembly, an outer ring, L-section ring and shaft locating washer and is axially preloaded after fitting. The radial component is a full complement preloaded cylindrical roller set. The outer ring, L-section ring and shaft locating washer have fixing holes. The unit is located by means of retaining screws for transport and safe handling. The Radial-axial preloading bearings offer static rigidity and high durability for heavy cutting both horizontally and vertically.
